Automatically better maintained with HTH®
When technology meets trust, pool maintenance becomes a worry-free routine with the new HTH® product line for automatic dosing systems.
The HTH® product line for automatic dosing systems.
Once properly set, the water stays balanced. For many pool professionals, the use of automatic measurement and control technology is already standard. What counts are reliable products that work seamlessly with the systems.
With the new liquid line, HTH® fills a previous gap in its product range and now offers suitable solutions for automatic dosing. These are available immediately from CHEMIA.
Whether it’s pH regulation or reliable chlorination: the three new concentrates have been specifically developed for use in dosing systems and can be dosed directly from their supply container.
Overview of the new HTH® products
HTH® pH-
Acid liquid concentrate for lowering pH, developed for use in dosing systems.
- High purity and concentration
- Direct dosing from the container
To lower the pH by 0.2, approximately 20 ml per m³ is required. The ideal pH range is between 7.0 and 7.4.
Introduce undiluted via a dosing pump. The recommended dosages are calculated based on water with average characteristics (pH and total alkalinity) and may vary significantly depending on actual water parameters.
HTH® pH+
Alkaline liquid concentrate for raising pH, developed for use in dosing systems.
- Highly concentrated
- Direct dosing from the container
To raise the pH by 0.2, approximately 20 ml per m³ is required. The ideal pH range is between 7.0 and 7.4.
Introduce undiluted via a dosing pump. The recommended dosages are calculated based on water with average characteristics (pH and total alkalinity) and may vary significantly depending on actual water parameters.
HTH® Liquichlor 15
Chlorine-based solution with a specific hardness stabiliser to prevent limescale deposits at dosing points.
- Special hardness stabiliser reduces the risk of blockage from lime precipitation
- Easy to use, can be dosed directly from the supply container via a dosing system
For fresh fills or shock treatments: Use approximately 5–10 ml per m³ every 2–4 days.
For continuous dosing: Adjust dosing so that at least 0.3 mg/l of free chlorine is measurable at the pool outlet. In case of cloudy or green water: Add 200 ml per 10 m³; if no improvement is seen after 24 hours, repeat the process.
Apply undiluted via the dosing system or manually (e.g. for shock treatment), evenly over the water surface while circulation is running.
What makes the new HTH® dosing range stand out
Developed for automatic dosing systems
These liquid concentrates are specifically designed for use in standard dosing systems – reliable, compatible and tailored for everyday technical operations.
Direct dosing from the container
No need to decant – the products can be dosed directly from their original packaging. This simplifies daily handling, reduces common user errors and ensures safer application.
High chemical purity
Premium raw materials and a clearly defined formulation guarantee precise, trouble-free dosing – even in sensitive pool systems.
Practical for higher consumption
The container sizes are ideal for private pools with higher maintenance demands or frequent use.
Stable water values through continuous dosing
Automatic dosing systems ensure a consistent release of active substances, contributing to long-term, reliable water quality.
HTH® – A brand built on trust and tradition
For nearly a century, HTH® has stood for quality, safety and innovation in pool water treatment worldwide. The new liquid products continue this legacy, offering solutions that meet the demands of modern pool technology.
Would you like to learn more or get advice on the new HTH® products?
Don’t hesitate to contact us.
We’re also available by phone.
