Sodium chloride? Hydrogen sulphate? Ammonium bifluoride? Magnesium sulphate? Calcium chloride? The world of salts is vast and we are bound to have the right one for you. Our network allows quick access to salts if we do not have them in stock. And as salts like to absorb water, we also have anti-clumping qualities for you. Ask us.
The well-known Swiss salt for technical applications. Available in 25kg sacks.
- 4440 Reosal fine, moist, 800 kg palletised 32 x 25 kg
- 4470 Reosal tablests, 1’000 kg palletised 40 x 25 kg
NaOH solid, caustic soda – widely used pH setting! Despite the hygroscopic properties of the compound, our micro-pearls are largely unsusceptible to clumping.
- NaOH solid, 1’225 kg palletised 49 x 25 kg
The alternative to NaOH, also with a low tendency to clumping
- KOH solid, 1’000 kg palletised 40 x 25 kg
Copper sulphate with anti-caking agent for avoiding unpleasant clumping.
- Copper sulphate, 1000 kg palletised 40 x 25 kg
Do you need other salt compounds? Send an enquiry!
Your contact persons
What characterises oils? They cannot be mixed with water! This results in excellent usage possibilities, e.g. as lubricants or slip agents. Surfactants, on the other hand, help to overcome the mutual repulsion of oil and water and to make stable mixes and emulsions. Discover our range of high-quality oils.
Not only fuels such as petrol, diesel or kerosene are extracted from crude oil but also a range of industrially required oils. We have a wide selection in stock at all times, e.g.
- Vaseline oil
- Paraffin oil, thin fluid (paraffinum perliquidum)
- Paraffin oil, thick fluid (paraffinum subliquidum)
As an alternative to oils refined from crude oil, a procedure was developed by Shell that can extract various synthetic products from available crude oil. We sell synthetic pure white oils with clearly defined properties.
- Shell Ondina – various types
- Shell Risella – various types
Your contact persons
The quality of gases is described by their purity. We sell high-purity ammonia in the quality ammonia 4.0 (corresponding to a purity of 99.99%), free from interfering impurities or water. The processes at our highly modern plant allow filling under the highest safety measures, to be able to supply you with safe containers. Our chlorine is offered with a purity of 99.98% and is available in containers up to 1000 kg.
Ammonia has been our competence for over 100 years. Since the start of industrial manufacturing, ammonia has been used in a wide range of processes and forms the basis for essential products such as medicines or fertilisers. The chemical and pharmaceutical industry needs it as a basic molecule for the synthesis of countless compounds. As a coolant it serves to operate cooling units and as a cracked gas it supports the setting of material properties.
The quality of gases is described by their purity. We sell high-purity ammonia in the quality ammonia 4.0 (corresponding to a purity of 99.99%), free from interfering impurities or water. The processes at our highly modern plant allow filling under the highest safety measures, to be able to supply you with safe containers.
Our central warehouse and the big container park (over 700 pressure cylinders and over 200 pressure barrels) give us an extremely high flexibility and delivery capability. The suitable connections and short delivery times go without saying – and our own vehicle fleet is available for emergency supplies.
Ammonia is classified as a hazardous substance. This applies to both fully or partially filled, as well as empty and uncleaned pressurised gas containers. Handling ammonia requires special safety and protection measures. We will be happy to advise.
Chlorine gas is important as a disinfectant in the treatment of drinking and swimming pool water and is needed for the manufacturing of a range of everyday raw materials, without being present in the end product (PVC plastics, precious metals, medicines). Chlorine is made of sodium chloride (cooking salt), using modern electrolysis procedures.
Chlorine is classified as hazardous goods. This applies to both fully or partially filled and empty, unwashed pressurised gas containers. Handling ammonia requires special safety and protection measures. We would be happy to advise.
The delivery of chlorine liquified under pressure is in special pressure cylinders and/or barrels. Thanks to our central location, we can supply you quickly and flexibly in containers of 65, 600 or 1000 kg, tailored to your requirements.
Your contact persons
In many processes, there is interference by gaseous bubbles or foam in the process water or other liquids. Foam that has formed can be destroyed again by reducing the surface tension of the micelles or even before it even occurs by removing the gaseous components. Our products will help you with this.
Process water with surfactants – such conditions are common in a range of applications. Our KORASILON Defoamer GD 30 was developed especially for these conditions. It is suitable for use in strongly acid as well as moderately alkali waters.
- KORASILON Defoamer GD 30
With the authorisation of BfR and FDA, KORASILON Defoamer FG allows the combatting of foam in food processes. In addition, the requirements of Detergent Law are fulfilled and the product can be used in washing and cleaning agents. KORASILON Defoamer FG is a non-ionic emulsion on the basis of polydimethylsiloxane.
- KORASILON Defoamer FG 10
- KORASILON Defoamer FG 10
KORA Defoamer B-AC is manufactured on the basis of alkoxylates and serves together with liquifiers on the basis of polycarboxylate ethers the purpose of setting the air pore content in building materials. We also offer alternatives when using liquifiers on the basis of lignosulphonates.
- KORA Defoamer B-AC
- KORA Defoamer TE
- KORA Defoamer TRE
Your contact persons
You can scarcely get by without acids and alkalis in the manufacturing of chemical products. For many other applications you also need chemicals for setting a certain pH value. If our standard product range does not include the quality you require, we would be happy to procure it for you.
No matter what your usage purpose is, we have the suitable acid for you. We stock basic acids such as sulphuric acid, hydrochloric acid, phosphoric acid and various others on site – and can put together the required concentration on request.
- Hydrochloric acid 32/34%
- Sulphuric acid 96%
- Sulphuric acid 50%
- Sulphuric acid 38%
- Formic acid 85%
- Acetic acid 80%
- Phosphoric acid 85%
- Phosphoric acid 75%
- Nitric acid 60%
Soda lye, potash lye – with a high turnover rate guaranteeing fresh goods.
Our Javel water meets DIN EN 901 and is therefore perfectly suited to dosing into bathing water. On request also with a hardness stabiliser to avoid limestone flocculation at the dosing point.
- Soda lye 30%
- Potash lye 50%
- Sodium hypochlorite 13/14% (chlorine bleach, Javel water)
- Ammonia solution 25%
Your contact persons
Smooth surfaces? Pleasant haptics? Here you can find clay minerals such as kaolin or bentonite that can be precisely selected for your processes and requirements due to their low hardness and range of grain sizes. But you will also find an extremely hard aluminium corundum.
The finest kaolin as a powder for technical applications. Your product is carefully refined. Of European extraction.
Excellent suitability as a separator for casting forms. Is characterised by high abrasion resistance. Is not attacked by acids and alkalis.
- Tabular alumina T 60
Various types of Viscogel allow your products to be set as required. The bentonite-based product is selected in accordance with requirements. Our stock includes
- Viscogel B7
- Viscogel B8
Your contact persons